8″ SW30XHR-400i Filmtec Seawater RO Membrane

SW30XHR-400i Seawater RO Membrane  is the highest rejection seawater element in the FILMTEC element range, enabling stringent water quality requirements to be met with single pass seawater systems in most situations.

  • Highest productivity available, with active area of 400 sq. ft., enables systems to be designed to deliver the lowest total cost of water by optimizing energy consumption, system productivity and operating flux.
  • Can effectively be used in permeate staged seawater desalination systems without impairing the performance of the downstream stage.
  • Very high NaCl and boron rejection to help meet World Health Organization (WHO) and other drinking water standards more cost effectively.
  • Automated, precision fabrication with a greater number of shorter membrane leaves reduces the effect of overall fouling and maximizes element efficiency, lowering your cost of operation.

 

  • Model: SW30XHR-400i
  • Hard fiberglass outer shell
  • Diameter: 8.0″
  • Length: 40″
  • Applied Pressure: 800PSI
  • Nominal Capacity in GPD: 6000
  • Maximum Pressure: 1200PSI
  • Weight: 40lbs
  • Stabilized salt rejection: 99.80%
  • Stabilized boron rejection: 93.0%
  • Maximum Operating Temperature: 113F (45C)
  • Maxium Feed Flow Rate: 85GPM
  • Maxium Pressure Drop: 15PSI
  • 400 ft2 of active membrane surface area
  • Includes iLEC™ interlocking endcaps, which reduce system operating costs and the risk of o-ring leaks that can cause poor water quality.
  • May be cleaned over the widest pH range (pH 1 – 12) for the most effective cleaning